Showing posts with label spinning. Show all posts
Showing posts with label spinning. Show all posts

Monday, November 1, 2010

New Spool Rack (Denise)

I've been waiting for my dad to make me a spool rack. For a variety of reasons, the project has been put off. Well, I got tired of waiting since my loom was sitting empty and was ready for my next project. I needed a spool rack to use with my sectional warp.

I made my own spool rack out PVC pipe. This is functional, and almost literate as a weaving tool.
To make this project, you'll need the following:
  • 4 - 90 degree elbows
  • 2 - 10' lengths of 3/4" PVC pipe (I found some pre-cut lengths so I only had to buy one)
  • 2 - 1/2" pipe about 2' long (I found some pre-cut lengths)
  • PVC pipe cutters (I used the ratcheting kind)
  • tape measure
  • permanent marker
  • 3/16" round wire (for the spools)
  • drill and drill bit larger than 3/16"
  • bolt cutters (cut the wire)
  • 2 self tapping screws 1-1/4" long
This construction is not exact science. So, decide a how many spools across? I did 4. It came out about 20-1/2"... on the inside, give or take. The wire needs to be a bit wider than half-way so it will stick in the holes and slots. The permanent marker is good for marking on PVC pipe.

It's about 41" long. I measured every 4" (centered 2" for the holes) along the sides on an extra piece as a template so the sides would be even. I drilled holes on one side and a slot on the other. Again this isn't exact or perfect. It will do, for now.

The 3/16" gauge round wire comes in 36" lengths. I could get 2 sections. So for 40 spools, that's 5 wires cut roughly in half and trimmed to fit.

The last step was to drill the 1/2" PVC pipe to the 3/4" pipe using the self tapping screws as a support.
Good luck!

Tuesday, August 17, 2010

Fiber Arts Judging Class I & II (NwRSA)

MAWS is providing a Judging Instruction Part I and II seminar through NwRSA on October 1-3, 2010. The class starts 8 am on October 1-3.

I have group rate rooms with the Elkhorn Inn in Montana City, MT, (1 Jackson Creek Road) for the seminar. Rate is $65 (+ tax) for the two nights that span October 1-3 that we meet for the class. Each attendee is responsible for reserving and paying for their own rooms. The number is 1-406-442-6625. Tell them “MAWS Event” to get the group rate.

Our first meeting day will be in the Elkhorn Inn Conference Room. Coffee and cookies are provided. After that, we meet at Montana City Schools.

The cost of the program is $140 per person if I receive money by September 18. After that, it costs $155.

Checks need to be made out to:
Great Falls Spinners & Weavers Guild
65 Treasure State Drive, Great Falls, MT 59404

If you have questions, call me at 406-868-1930…or email meagi1@bresnan.net (meagi one)

Sunday, August 8, 2010

Fair Time (Denise)

All went well at the fair. I entered in about 10 items. I made back a bit more than I spent. That is the goal.

I took a class on boundweave. Boundweave is set up on wide spaced warp threads on a 4 or 6 heddle loom. I used 8/3 linen rug warp at 6 ends per inch (epi). Using a 2-2 twill pattern for the beginning and ending, I created the sampler pattern. It just depends on what colors you shoot across. The twill pattern progresses in the same order, the colors just change. 4 shots = one color row. Logically this is ideal for rugs. The center part is figurative boundweave (you can see figures). That is woven on a 1-3 twill. The same principle applies, the colors make the pattern, not the weaving.

My dad's sweater took second because of the neckline. While it was knitted perfectly, I have a line of elastic thread in there. The weight of the garment distorts the sweater. The elastic holds it together. A note in the future - save the elastic till after judging.

My pillow is finally done. using 20/2 cotton thread wasn't wise for a first project on my floor loom. Progress was very slow.

My drop spindle yarns did well enough. I did them while watching my kids in swimming lessons. The gray Gotland is a bit over-plied. That's why it got the "that's nice" award.

By boucle got second. With more subdued colors it may have done better. Who knows. On to the next!

Friday, March 19, 2010

Gilligan's Fleece

Denise - Last night I finished combing Gilligan's fleece. He's a nice Columbia sheep. I got only 1/2 (about 7#) from Lisa.

I had tried the Fermented Suint Method of washing. I didn't enjoy that. To read more, please click on this link on SpinOffmagazine.com. The fleece survived in spite of everything and came through with glossy whiteness.

He is destined for a weaving project. I'm spinning up worsted style singles to ply. I think it will become a blanket or a throw. I'll need to dye the yarn, but haven't decided yet. I'm thinking of maybe M and O, or a point twill. I'll probably change my mind several times. Who knows what the wool will want.

Dad's Sweater


Denise's - I finished my Dad's sweater in time for Christmas '09. It took a while, but task complete. I bought the Lincoln/Targhee fleece from Cory Simpson. I sent it to Going to the Sun Fiber Mill for processing since I had about 4 fleeces and little time.

Total time from spinning to wearing was about 1-1/2 years. I had to take a little bit of time off to have my finger heal from a cat bite(I'll not share those photos). New cat and "helpful" dog ended poorly for me.

Let it be known that while my dad chose the pattern, he had no real idea how challenging the cables really were for me. He always wanted an "Irish Rover's" sweater. I tried to guide him towards an easier one. He had his heart set on that sweater. For me, the mere thought of the cables gave me heart palpitations.

While I spun up the fleece, I had the chance to think about my approach. I charted out each pattern on a separate page. I made my charts in color. Soon, I was ready to go.

After a few rounds of crosses, I realized that the extra cable needle was cumbersome (my kids and cats really liked that thing). I researched on the net and found out how to cable without a needle. I really made progress.

I tried out steeks for the first time. Knitting them was easy. At the end of the torso, I prepared for the cutting and tacking. This too went well.